The Craftsman – DIY Vinyl Gate Kit

$50.55 – $70.55

The Craftsman DIY Vinyl Gate Kit comes with the uprights and screws you need to produce a 6’ tall and up to 6’ wide gate. Requires the purchase of The Craftsman DIY Vinyl Panel Kit and a DIY Vinyl Gate Hardware Kit. This kit may require additional tools depending on desired gate size.

This kit includes:

  • 2 – Pre-routed uprights
  • 20 – #8 x 1” Phillips #2 white screws
  • 2 – End caps

Available in:
White – $50.55
Tan – $60.55
Slate Gray – $70.55

*ONLY AVAILABLE FOR PICK UP

SKU: N/A Category:

Color

Slate Gray, Tan, White

Related products

  • DIY Kit

    The Modern – DIY Aluminum Panel

    The Modern DIY Aluminum Panel is 6’ wide x 4’ high. It is pre-notched to fit inside an end, line, or corner post. Follows most terrain with the ability to rack 1” per foot. Made in the USA.

    Color: Black

    *ONLY AVAILABLE FOR PICK UP

    $84.40
  • DIY Kit

    The Craftsman – DIY Vinyl End Post

    The Craftsman DIY Vinyl End Post is to be used in combination with our Craftsman DIY Vinyl Panel Kit. End posts are needed at the point where the fence meets the house, to frame the gate opening, or when the new fence meets a pre-existing fence or structure. This is a pre-routed post. No brackets needed. Caps sold separately.

    Posts are sold individually.

    Available in:
    White – $25.06
    Tan – $29.18
    Slate Gray – $34.78

    *ONLY AVAILABLE FOR PICK UP

     

    $25.06 – $34.78
  • DIY Kit

    The Craftsman – DIY Vinyl Corner Post

    The Craftsman DIY Vinyl Corner Post is to be used in combination with our Craftsman DIY Vinyl Panel Kit. Corner posts are needed at every point the fence will create a 90-degree angle. This is a pre-routed post. No brackets needed. Caps sold separately.

    Posts are sold individually.

    Available in:
    White – $25.06
    Tan – $29.18
    Slate Gray – $34.78

    *ONLY AVAILABLE FOR PICK UP

    $25.06 – $34.78
  • DIY Kit

    The Craftsman – DIY Vinyl Gate Upgrade Kit

    This kit is to be used along with any of our DIY Vinyl Gate Kits. This DIY Vinyl Gate Upgrade Kit comes with everything you need to affordably strengthen your vinyl gate. This kit creates an interior steel frame that fits inside your gate to reduce sagging, warping, or bowing under stress.

    **We recommend an aluminum h-beam post stiffener to strengthen your gate hinge post due to the extra weight of the gate. H-Beam sold separately. This kit can only be used with vinyl gates.

    This kit includes:

    • 2 – 71” galvanized steel j-stiffeners
    • 2 – 71” galvanized steel rail u-stiffeners
    $122.80
  • DIY Kit

    The Modern – DIY Aluminum End Post

    The Modern DIY Aluminum End Post is to be used in combination with our Modern DIY Aluminum Panel Kit. End posts are needed at the point where the fence meets the house, to frame the gate opening, or when the new fence meets a pre-existing fence or structure. This is a pre-routed post. No brackets needed. Post measures 2″ x 2″ x 6.’

    Color: Black

    *ONLY AVAILABLE FOR PICK UP

    $22.75