| Color | Slate Gray, Tan, White |
|---|
The Craftsman – DIY Vinyl Line Post
$25.06 – $34.78
The Craftsman DIY Vinyl Line Post is to be used in combination with our Craftsman DIY Vinyl Panel Kit. Line posts are needed at the end of a panel to connect to another panel in a straight line of fence. This is a pre-routed post. No brackets needed. Caps sold separately.
Posts are sold individually.
Available in:
White – $25.06
Tan – $29.18
Slate Gray – $34.78
*ONLY AVAILABLE FOR PICK UP
Related products
-
DIY KitThe Craftsman – DIY Vinyl Gate Upgrade Kit
$122.80This kit is to be used along with any of our DIY Vinyl Gate Kits. This DIY Vinyl Gate Upgrade Kit comes with everything you need to affordably strengthen your vinyl gate. This kit creates an interior steel frame that fits inside your gate to reduce sagging, warping, or bowing under stress.
**We recommend an aluminum h-beam post stiffener to strengthen your gate hinge post due to the extra weight of the gate. H-Beam sold separately. This kit can only be used with vinyl gates.
This kit includes:
- 2 – 71” galvanized steel j-stiffeners
- 2 – 71” galvanized steel rail u-stiffeners
-
DIY KitThe Craftsman – Vinyl Flat Cap
$2.25 – $3.755″ x 5″ pyramid cap. Caps are sold individually. Available in white, tan, and slate gray.
Available in:
White – Vinyl Flat Cap $2.25
Tan – Vinyl Flat Cap $2.70
Slate Gray – Vinyl Flat Cap $3.75*ONLY AVAILABLE FOR PICK UP
-
DIY KitThe Modern – DIY Aluminum Panel
$84.40The Modern DIY Aluminum Panel is 6’ wide x 4’ high. It is pre-notched to fit inside an end, line, or corner post. Follows most terrain with the ability to rack 1” per foot. Made in the USA.
Color: Black
*ONLY AVAILABLE FOR PICK UP
-
DIY KitThe Craftsman – Single Vinyl Gate Hardware Kit
$68.92This Single Vinyl Gate Hardware Kit contains everything you need for building and installing a single (3’, 4’, 5′, or 6’) walk gate. This kit requires the purchase of The Craftsman DIY Vinyl Panel Kit & DIY Vinyl Gate Kit.
This kit includes:
- 2 – Black self-closing adjustable wrap-around stainless-steel hinges
- 1 – Black self-latching stainless-steel latch
- 1 – Black handle Screws for installation included
*ONLY AVAILABLE FOR PICK UP
-
DIY KitThe Craftsman – DIY Vinyl End Post
$25.06 – $34.78The Craftsman DIY Vinyl End Post is to be used in combination with our Craftsman DIY Vinyl Panel Kit. End posts are needed at the point where the fence meets the house, to frame the gate opening, or when the new fence meets a pre-existing fence or structure. This is a pre-routed post. No brackets needed. Caps sold separately.
Posts are sold individually.
Available in:
White – $25.06
Tan – $29.18
Slate Gray – $34.78
*ONLY AVAILABLE FOR PICK UP