The Craftsman – DIY Vinyl Corner Post

$25.06 – $34.78

The Craftsman DIY Vinyl Corner Post is to be used in combination with our Craftsman DIY Vinyl Panel Kit. Corner posts are needed at every point the fence will create a 90-degree angle. This is a pre-routed post. No brackets needed. Caps sold separately.

Posts are sold individually.

Available in:
White – $25.06
Tan – $29.18
Slate Gray – $34.78

*ONLY AVAILABLE FOR PICK UP

Category:
Color

Slate Gray, Tan, White

Related products

  • DIY Kit

    The Craftsman – DIY Vinyl Panel Kit

    The Craftsman DIY Vinyl Panel Kit has everything you need to produce one 6’h x 6’w vinyl privacy panel. Follows most terrain with the ability to rack 1” per foot. Assembly required. Made in the USA.

    Available in:
    White – $81.35
    Tan – $93.05
    Slate Gray – $108.87

    Kit Includes:

    • 11 – 6” wide tongue and groove (T&G) pickets
    • 2 – Pre-notched pocket rails
    • 2 – U-channels
    • 6 – #8 x 1” Phillips #2 white screws (Only provided with tan and slate gray kits)

    *ONLY AVAILABLE FOR PICK UP

    $81.35 – $108.87
  • DIY Kit

    The Modern – Single Aluminum Gate Hardware Kit

    This kit requires the purchase of one Modern DIY Aluminum Gate.

    This kit contains:

    • 2 – Black self-closing adjustable stainless-steel hinges
    • 1 – Black self-latching stainless-steel latch
    • Screws for installation included

    *ONLY AVAILABLE FOR PICK UP

    $68.92
  • DIY Kit

    The Modern – DIY Aluminum End Post

    The Modern DIY Aluminum End Post is to be used in combination with our Modern DIY Aluminum Panel Kit. End posts are needed at the point where the fence meets the house, to frame the gate opening, or when the new fence meets a pre-existing fence or structure. This is a pre-routed post. No brackets needed. Post measures 2″ x 2″ x 6.’

    Color: Black

    *ONLY AVAILABLE FOR PICK UP

    $22.75
  • DIY Kit

    The Craftsman – Vinyl Flat Cap

    5″ x 5″ pyramid cap. Caps are sold individually. Available in white, tan, and slate gray.

    Available in:
    White – Vinyl Flat Cap $2.25
    Tan – Vinyl Flat Cap $2.70
    Slate Gray – Vinyl Flat Cap $3.75

    *ONLY AVAILABLE FOR PICK UP

    $2.25 – $3.75
  • DIY Kit

    The Craftsman – DIY Vinyl Gate Upgrade Kit

    This kit is to be used along with any of our DIY Vinyl Gate Kits. This DIY Vinyl Gate Upgrade Kit comes with everything you need to affordably strengthen your vinyl gate. This kit creates an interior steel frame that fits inside your gate to reduce sagging, warping, or bowing under stress.

    **We recommend an aluminum h-beam post stiffener to strengthen your gate hinge post due to the extra weight of the gate. H-Beam sold separately. This kit can only be used with vinyl gates.

    This kit includes:

    • 2 – 71” galvanized steel j-stiffeners
    • 2 – 71” galvanized steel rail u-stiffeners
    $122.80