DIY Kit
Showing 1–12 of 20 results
-
DIY Kit
The Craftsman – DIY Vinyl Panel Kit
The Craftsman DIY Vinyl Panel Kit has everything you need to produce one 6’h x 6’w vinyl privacy panel. Follows most terrain with the ability to rack 1” per foot. Assembly required. Made in the USA.
Available in:
White – $81.35
Tan – $93.05
Slate Gray – $108.87Kit Includes:
- 11 – 6” wide tongue and groove (T&G) pickets
- 2 – Pre-notched pocket rails
- 2 – U-channels
- 6 – #8 x 1” Phillips #2 white screws (Only provided with tan and slate gray kits)
*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – DIY Vinyl End Post
The Craftsman DIY Vinyl End Post is to be used in combination with our Craftsman DIY Vinyl Panel Kit. End posts are needed at the point where the fence meets the house, to frame the gate opening, or when the new fence meets a pre-existing fence or structure. This is a pre-routed post. No brackets needed. Caps sold separately.
Posts are sold individually.
Available in:
White – $25.06
Tan – $29.18
Slate Gray – $34.78
*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – DIY Vinyl Corner Post
The Craftsman DIY Vinyl Corner Post is to be used in combination with our Craftsman DIY Vinyl Panel Kit. Corner posts are needed at every point the fence will create a 90-degree angle. This is a pre-routed post. No brackets needed. Caps sold separately.
Posts are sold individually.
Available in:
White – $25.06
Tan – $29.18
Slate Gray – $34.78
*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – DIY Vinyl Gate Kit
The Craftsman DIY Vinyl Gate Kit comes with the uprights and screws you need to produce a 6’ tall and up to 6’ wide gate. Requires the purchase of The Craftsman DIY Vinyl Panel Kit and a DIY Vinyl Gate Hardware Kit. This kit may require additional tools depending on desired gate size.
This kit includes:
- 2 – Pre-routed uprights
- 20 – #8 x 1” Phillips #2 white screws
- 2 – End caps
Available in:
White – $50.55
Tan – $60.55
Slate Gray – $70.55
*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – DIY Vinyl Gate Upgrade Kit
This kit is to be used along with any of our DIY Vinyl Gate Kits. This DIY Vinyl Gate Upgrade Kit comes with everything you need to affordably strengthen your vinyl gate. This kit creates an interior steel frame that fits inside your gate to reduce sagging, warping, or bowing under stress.
**We recommend an aluminum h-beam post stiffener to strengthen your gate hinge post due to the extra weight of the gate. H-Beam sold separately. This kit can only be used with vinyl gates.
This kit includes:
- 2 – 71” galvanized steel j-stiffeners
- 2 – 71” galvanized steel rail u-stiffeners
-
DIY Kit
The Craftsman – Single Vinyl Gate Hardware Kit
This Single Vinyl Gate Hardware Kit contains everything you need for building and installing a single (3’, 4’, 5′, or 6’) walk gate. This kit requires the purchase of The Craftsman DIY Vinyl Panel Kit & DIY Vinyl Gate Kit.
This kit includes:
- 2 – Black self-closing adjustable wrap-around stainless-steel hinges
- 1 – Black self-latching stainless-steel latch
- 1 – Black handle Screws for installation included
*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – Double Drive Vinyl Gate Hardware Kit
This Double Drive Vinyl Gate Hardware Kit contains everything you need for building and installing an (8’, 10’, or 12’) double drive gate. This kit requires the purchase of The Craftsman DIY Vinyl Panel Kit & DIY Vinyl Gate Kit.
This kit includes:
- 4 – Black self-closing adjustable wrap-around stainless-steel hinges
- 1 – Black self-latching stainless-steel latch
- 1 – Black handle
- 1 – 24” black stainless-steel drop rod Screws for installation included
*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – Vinyl Flat Cap
5″ x 5″ pyramid cap. Caps are sold individually. Available in white, tan, and slate gray.
Available in:
White – Vinyl Flat Cap $2.25
Tan – Vinyl Flat Cap $2.70
Slate Gray – Vinyl Flat Cap $3.75*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – Vinyl New England Cap
5″ x 5″ New England cap. Caps are sold individually. Available in white, tan, and slate gray.
Available in:
White – Vinyl New England Cap $7.25
Tan – Vinyl New England Cap $9.50
Slate Gray – Vinyl New England Cap $14.75*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – Vinyl Gothic Cap
5″ x 5″ Gothic cap. Caps are sold individually. Available in white and tan.
Available in:
White – Vinyl Gothic Cap $9.50
Tan – Vinyl Gothic Cap $11.65*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – Vinyl Solar Cap
5″ x 5″ solar cap.
Available in:
White – Vinyl Solar Cap $33.25
Tan – Vinyl Solar Cap $39.95
*ONLY AVAILABLE FOR PICK UP
-
DIY Kit
The Craftsman – H-Beam
H-Beams are used for strengthening the hinge post for a vinyl gate. Measures 5″ x 5″ x 96″
*ONLY AVAILABLE FOR PICK UP